Trumix Single Blend and Single High Flow Blender

No votes yet


Blends CO2 and N2 to your specifications. Used for single blend long draw beer systems. Best for dispensing one style of beer.

Print Friendly and PDF

•Size: 9.5" wide (including mounting flanges x 10" high x 4.5" deep
•Hook-Up: Two inlet lines and two outlet lines.
•Fittings: Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8".
•Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
•Standard Flow: Up to 30 kegs/hr. (15 kegs/hr. per blend) dispensed.
•High Flow Blender: Up to 60 kegs/hr.(30 kegs/hr. per blend) dispensed. Used for systems requiring two blends of C02 and N2 that operate with higher than usual gas flow.
•Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi.
•Outlet Pressures: Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges.

Trumix Single Blend Blender

Leave a comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.